1×6 switch

Last year I built a 1×6 antenna switch. The switch was designed for my SO2R station. The goal was to built a 2×6 switch (see Top Ten Devices app note) with a high isolation between the different ports.

Previous designs for a 2×6 switch failed due to bad isolation values (less than 50dB). These designs were build with loads of relays, but without a PCB. After some experiments with a A/B switch (with isolation values of around 100dB) the 1×6 switch was designed.

PD9X has some nice images of the switch.




Leave a Comment

NOTE - You can use these HTML tags and attributes:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>